refamulti.blogg.se - Port forward apple airport extreme

#PORT FORWARD APPLE AIRPORT EXTREME MAC OS X#
#PORT FORWARD APPLE AIRPORT EXTREME MANUAL#
#PORT FORWARD APPLE AIRPORT EXTREME SOFTWARE#
#PORT FORWARD APPLE AIRPORT EXTREME PC#

Remote access will be obtained by entering your IP address followed by a colon and the port number.Ĭlick on the "Advanced" option, and choose, "Port Mapping". You will need this IP address to remotely access your DVR system. In this window, you will notice your ISP provided IP address, which is probably a dynamic IP address, which changes every so often. I have the 3rd generation, version 7.6.1 Airport Extreme, so yours may be different. Once you know your DVR or camera's IP address, open up Applications/Utilitilies/Airport Utility to configure your port mapping.

#PORT FORWARD APPLE AIRPORT EXTREME MANUAL#

You should consult your manual for your DVR device to find out what the IP address is. In my case, each camera was assigned its own (10.0.1.X). The DVR server should be automatically assigned an IP address (DHCP) by your Airport Extreme router. The DVR server simply needs an IP address (and other networking parameters) to make them accessible remotely. I use netcams that are standalone IP cameras, but I may be able to shed some light on this for you all: I was recently successful accessing my video surveilance cameras remotely.

#PORT FORWARD APPLE AIRPORT EXTREME SOFTWARE#

"Well Known" TCP and UDP ports used by Apple software products) O On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations. Reserve a DHCP-provided IP address for the Security DVR. To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:ġ. The following is the basic steps to do so: Once you know these, it's pretty much a simple matter of "plugging-in" these values into the AirPort Utility. In order to configure your 802.11n AirPort Extreme Base Station (AEBSn) for Port Mapping/Forwarding, you will need to know at least two things: 1) The MAC hardware address of the Security DVR, and 2) Which UDP & TCP ports need to be opened to allow access from the Internet to the DVR. Product specifications are subject to change without notice.Port Mapping and Port Forwarding are synonomous and have been used interchangeably. Wireless Internet access requires a wireless-enabled computer, a base station or other access point, and Internet access (fees may apply). Wi-Fi Protected Access is a mark of the Wi-Fi Alliance.

#PORT FORWARD APPLE AIRPORT EXTREME MAC OS X#

Support for Wi-Fi Protected Access (WPA/WPA2) requires Mac OS X v10.3 or later or Windows XP with SP2 or later.

Weight varies by configuration and manufacturing process.

The AppleCare Protection Plan for your computer covers the AirPort Extreme Base Station.

#PORT FORWARD APPLE AIRPORT EXTREME PC#

PC with Windows XP (SP3), Windows Vista (SP2) or Windows 7 (SP1)

PC with Windows XP (SP3), Windows Vista (SP2), or Windows 7 (SP1).

PC with Wi-Fi Certified 802.11a/b/g/n card PC with Windows XP (SP3), Windows Vista (SP2), or Windows 7 (SP1)

Channels 1-13, 36-64, and 149-165 approved for use in Australia, Hong Kong, and New Zealand.

Channels 1-13, 36-64, and 100-140 approved for use in Japan.

Channels 1-11, 36-48, and 149-165 approved for use in the United States and Canada.

Maximum operating altitude: 10,000 feet.

Relative humidity (storage): 10% to 90%.

Relative humidity (operational): 20% to 80%.

Operating temperature: 32° to 95° F (0° to 35° C).

USB 2.0 port for connecting a USB printer or USB external hard drive.

Three Gigabit Ethernet LAN ports for connecting computers or network devices.

One Gigabit Ethernet WAN port for connecting a DSL or cable modem.

Wireless security (WEP) configurable for 40-bit and 128-bit encryption.

NAT, DHCP, PPPoE, VPN Passthrough (IPSec, PPTP, and L2TP), DNS Proxy, SNMP, IPv6 (6to4 and manual tunnels).

Interoperable with Wi-Fi Certified 802.11a, 802.11b, 802.11g, or 802.11n enabled Mac computers, iPad, iPhone, iPod touch, and Windows-based PCs.